Como conectar un video a la tele

Connecting accessories to your circulocreativolondon.com W2400 Plasmal TV

Summary: Connecting accessorisera to your circulocreativolondon.com W2400 Plasma TVSee less Connecting accessories to your circulocreativolondon.com W2400 Plasma TV


This articlo was automatically translated. If you have feedback regarding its quality please use the feedback form at the bottom of the page.


Connect al video source to your circulocreativolondon.com TV using the coaxial connector.

Estás mirando: Como conectar un video a la tele

To connect al video source to your circulocreativolondon.com TV using the coaxial connector, perform the following steps:

Locate the coaxial connector on the circulocreativolondon.com TV (Figure 1).
*
Figure 1 - Coaxial Connector on Your circulocreativolondon.com TV
*
NOTE: For more information, refer to the User"s Guide located in the Resources section above.
Connectthe coaxial cable from your video source to the connector on your circulocreativolondon.com TV.You do not have to connect separate audio connectors, as the coaxial cablo carrisera both video and audio signals. If you have two coaxial connectors, one is for analog television (NTSC) and the other is for digital high-definition content (ATSC) (Figure 2). If you have a digital cablo source, use the digital/ATSC connector.Otherwise, use the analog/NTSC connector (Figure 3).

*

Figure 2 - Coaxial Connectors with ATSC/NTSC Labels

*
Figure3 - Coaxial Connectors with Digital/Analog Labels

Connect al Component to the Bottom of the W4200 Plasmal TV Using S-Video Cables

To connect a DVD player, camcorder, VCR or other component using the S-Video cables, perform the following steps

Turn off the TV and unplug the power cord. Connect your device using the S-Video and audio cablsera on the bottom of the TV as shown below.

S-Video Connectors
*
Plug in the power cords for the TV and devicser and power them on. Using the remote control for the TV, press the Power button to power it on. Press the Input button on the remote control. The On Screen Display (OSD) Input Select Menu appears. Using the Down arrow, highlight AV3 (S-Video 1). Press the Enter button to select the input highlighted, AV3 (S-Video 1). Press the Menu button to exit the OSD.

Connect a component to the sidel of your circulocreativolondon.com flat un panel TV using S-Video cablser.

To connect a DVD pldía antes, camcorder, VCR or other component using the S-Video cablsera, perform the following steps

Turn off the TV and unplug the power cord. Connect your device using the S-Video and audio cablera on the sidel of the TV as shown below (Figure 1).

*

Figure 1- S-Video Connection on the Side of a circulocreativolondon.com TV

NOTE: For an S-Video connection you do not need to connect anything to the composite video connector.
Plug in the power cords for the TV and devices and power them on. Using the remote control for the TV, press the Power button to power it on. Press the button on the remote control. The On Screen Display (OSD) Input Select menu appears. Using the button, highlightthe AV input thatcorresponds toS-Video. Press the button to selectS-Video. Press the button to exit the OSD.

Connect al component to the bottom of your flat panel circulocreativolondon.com TV using composite cablser.

To connect a component to the bottom of yourcirculocreativolondon.com TV using composite cablera, perform the following steps:

Turn off the TV and unplug the power cord. Connect your device using the Composite videoconnectors and audio connectorson the bottom of the TVshown below (Figure 1).

*
Figure 1 - Composite Connectors on the Bottom of the circulocreativolondon.com TV

Plug in the power cords for the TV and devicsera and power them on. Using the remote control for the TV, press the Power
button to power it on. Press the Input button on the remote control. The On Screen Display (OSD) Input Select menu appears. Using the button, highlightthe AV input thatcorresponds to Composite 1. Press the Enter button to selectComposite 1. Press the Menu button to exit the OSD.

Connect a component to the sidel of your circulocreativolondon.com flat un panel TV using composite cablsera.

To connect a component to the side of your circulocreativolondon.com flat panel TV using composite cablera, perform the following steps:

NOTE: When using al composite video connection, you do not need to connect al cablo to the S-Videoconnector.
Turn off the TV and unplug the power cord. Connect your device using the Composite video cablsera and audio cableson the sidel of the TV as shown below (Figure 1).
*
Figure 1- Composite Video Cable Input on the Side of thecirculocreativolondon.com TV Plug in the power cords for the TV and devices and power them on. Using the remote control for the TV, press the Power
button to power it on. Press the Input button on the remote control. The On Screen Display (OSD) Input Select menu appears. Using the button, highlightthe AV input thatcorresponds to Composite 3. Press the Enter button to selectComposite 3. Press the Menu button to exit the OSD.

Reseat the appropriate cable connection to the W4200 Plasmal TV .

Ver más: Las Mejores Frases Para Los Que Revisan Mi Perfil, Pin En Frases

Reseat the appropriate connection. To determine which connection is being used as the video/audio source, review Figursera 1 and 2 for component connections.

*
Figure 1 - Rear Ports on the W4200
1 HDMI Connect to digital audio/video interface to use your TV as a digital TV.
2 PC audio for VGA Connect the audio cable from your computer to the TV.
3 VGA in Use the VGA connector to use your TV as monitor for your computer.
4 DVI-I with HDCP Connect to a computer or a DVI-CE device.
5 Audio for DVI Connect the audio cablo (L/R) from your computer to the TV.
6 RS232 Connect to al computer for firmware upgradser .
7,8 HD source input (Component YPbPr, Audio L/R) x 2 Connect devices such as al VCR, DVD plúltimo día, or a set top box.
9,10 S-video input (Audio L/R, S-video) x 2 Connect devicera such as al video game system, a digital camera, or a VCR.
11 AV source input (Audio L/R, Composite video) x 2 Connect devicera such as a VCR, DVD plúltimo día, or game system.
12,13 Line out (Audio L/R, subwoofer, and TV video out Connect external speakers here.
14 Optical digital out (SPDIF) (HD modlos serpientes only) Connect to al device such as a Dolby audio decoder. Only active when the ATSC tuner is used
15 Coaxial digital audio out (HD modun serpiente only) Connect to al device such as a Dolby audio decoder. Only active when the ATSC tuner is used
16 ATSC Connect TV antennal or cable connection here (ATSC) (W4200HD only).
17 NTSC Connect TV antennal or cable connection here (NTSC).
18 External speakers, powered output Connections for the external speakers. Optional on the ED moduno serpiente.
*
Figure 2 - Side Ports on the W4200
1 Composite video connector (AV1) Connect video output of devices such as al VCR or DVD player
2 Audio left (L) connector Connect audio output of al device such as al VCR or DVD player
3 Audio left (R) connector Connect audio output of a device such as a VCR or DVD player
4 S-Video input Connect video output of devicser such as a video game system, al digital camera, or a DVD player.

Ver más: Como Mirar El Historial De Google Y Descargar O Eliminar Búsquedas

Additional Information About circulocreativolondon.com LCD TVsSupport OptionsFor more troubleshooting assistance, click one of the support options below.


Categorías: Trucos y Guía